topic Re: Xperia x10 "Unable to scan for networks" in Other/General

Xperia x10 "Unable to scan for networks"

Mon, 17 Jan 2011 21:13:58 GMT

Hi, I have an xperia x10 on at&t (still only with android 1.6) and it has been working fine until a couple of days ago. My wi-fi has been working fine (except for the occasional "unable to start wifi") until one day it just stopped working. I was connected to my home wifi network when all of a sudden it just disconnected. I proceeded to go into my settings to turn it back on, however, when I checked the box, it turned on for about 5 seconds then turned off and said "unable to scan for networks." I have tried everything I can to get it back to working. I have tried:

-Taking out the battery, sim, and memory card for a few minutes. replacing them all and restarting the phone.

-doing the above but while everything is out holding the back key for 30 seconds, then putting everything back in and holding the power button for 10 seconds.

-Plugging the phone into my computer

The only thing I haven't done is the factory reset. I do NOT want to do this because I have heard that it only sometimes works and if it doesn't work, then I cant't get any of my apps or anything back on my phone and it will be completely useless to me. I do not want to lose all the data on my phone because I have no internet currently, and therefore can not backup anything.

Please provide me with some info that can fix this!

Re: Xperia x10 "Unable to scan for networks"

Uliwooly — Mon, 17 Jan 2011 21:16:16 GMT

if you get the latest version of Back Up & Restore you WON"T lose your apps, since it backs them up.

just click on this link or use NEOREADER on the QR code bellow

http://www.sonyericsson.com/update/BackupAndRestore/xperiaX10?lc=en&cc=NO

Re: Xperia x10 "Unable to scan for networks"

Uliwooly — Mon, 17 Jan 2011 21:16:36 GMT

here is the QR code

Re: Xperia x10 "Unable to scan for networks"

Uliwooly — Mon, 17 Jan 2011 21:21:04 GMT

Do you really care about AT&T apps on your phone or do you want to have Android 2.1?

if you do, you can always debrand your phone, now by doing this the warranty won't cover it as long as you have an unbranded firmware on your phone, but if you flash it back to AT&T when you need it to be repaired then you should be fine, then again is up to you

here is the link it's quite simple

http://forum.xda-developers.com/showthread.php?t=825201

Re: Xperia x10 "Unable to scan for networks"

Mon, 17 Jan 2011 21:29:20 GMT

Remember I don't have internet?

Re: Xperia x10 "Unable to scan for networks"

Mon, 17 Jan 2011 21:30:53 GMT

I have looked into debranding and rooting, I would love to get rid of AT&T. But I do not want to take the risk of making a mistake and ruining my phone. The instructions are kind of confusing.

Re: Xperia x10 "Unable to scan for networks"

Uliwooly — Mon, 17 Jan 2011 21:34:09 GMT

well there's an easier way to do it, through davinci team

http://davinciteam.us/index.html

they will charge around $15

It's not that complicated to do it through the XDA

http://forum.xda-developers.com/showthread.php?t=825201

just follow "gfgodoy" steps

Here's what happens:

You download the two files listed by Binary
Put the extracted firmware in the firmware directory (along with loader.sin)(10 sin files together)
Open the .bat file (type in 1, 2 , 3 or 4 depending on your windows version).
It will ask you: Please plug Xperia in flash mode so,

Turn off your phone, press back and plug the usb cable! and Hit enter ( you should be quick, if you take to long it may not work, you have about 5 seconds. You know you are in flash mode because de GREEN LED on your X10 will stay ON)

Your device will stay with the screen off while flashing. The .bat will be running and running like mad for about 2-3 minutes. After that WAIT for windows to tell you that it has finished. Hit ENTER. The .bat WILL CLOSE.

On your device: Unplug your USB cable, wait for it to boot. I waited for like 2 minutes and nothing so I had to press POWER again.

A device and a camera with a BLUE arrow will appear on your device screen. WAIT, WAIT, WAIT. It will reboot, and take like 2 minutes on sony ericson screen.

It will boot up eventualy.

Re: Xperia x10 "Unable to scan for networks"

Uliwooly — Mon, 17 Jan 2011 21:36:36 GMT

then follow this link http://www.sonyericsson.com/update/BackupAndRestore/xperiaX10?lc=en&cc=NO and use PC Companion to install the latest Back Up & Restore but you should go for 2.1

Re: Xperia x10 "Unable to scan for networks"

Thu, 20 Jan 2011 17:03:51 GMT

i downloaded the files, how do i got about debranding?

Re: Xperia x10 "Unable to scan for networks"

Uliwooly — Thu, 20 Jan 2011 18:39:21 GMT

You download the two files listed by Binary

unzip them

Put the extracted firmware in the firmware directory (along with loader.sin)(10 sin files together)

Open the .bat file (type in 1, 2 , 3 or 4 depending on your windows version).

It will ask you: Please plug Xperia in flash mode so,

On your device: Unplug your USB cable, wait for it to boot. I waited for like 2 minutes and nothing so I had to press POWER again.

A device and a camera with a BLUE arrow will appear on your device screen. WAIT, WAIT, WAIT. It will reboot, and take like 2 minutes on sony ericson screen.

It will boot up eventualy.

Re: Xperia x10 "Unable to scan for networks"

Uliwooly — Thu, 20 Jan 2011 18:47:11 GMT

this is easier to use

http://forum.xda-developers.com/showthread.php?t=825675

Re: Xperia x10 "Unable to scan for networks"

Thu, 20 Jan 2011 20:53:51 GMT

this is very confusing you have suggested different ones. Can you pick one that allows be to get rid of at&t and get me android 2.1? if you pick one, can you personally gave me a step by step instruction, instead of just stuff copied off another website. I need something like "go to folder __ , delete "xxxx" and replace with "xyxy" because it is confusing for me.

Re: Xperia x10 "Unable to scan for networks"

Uliwooly — Thu, 20 Jan 2011 22:12:37 GMT

yeah no problem.

go to this

http://forum.xda-developers.com/showthread.php?t=825201

Download Flasher:
Please download in this thread:
http://forum.xda-developers.com/show...47&postcount=1

and

Xperia X10a firmware

http://www.multiupload.com/ZGI6JWKIPG GENERIC

once you download both files, unzip the flasher and look for a folder that will say "firmware"

then in that folder unzip the xperia x10a firmware (along with loader.sin)(10 sin files together)

go to the main folder (the previous folder before you got inside firmware)

Open the .bat file

Once open select 1, 2 , 3 or 4 depending on your windows version).

It will ask you: Please plug Xperia in flash mode so,

On your device: Unplug your USB cable, wait for it to boot. I waited for like 2 minutes and nothing so I had to press POWER again.

A device and a camera with a BLUE arrow will appear on your device screen. WAIT, WAIT, WAIT. It will reboot, and take like 2 minutes on sony ericson screen.

It will boot up eventualy.

let me know if this is better/easier if not I can try to take pictures of the step by step

Re: Xperia x10 "Unable to scan for networks"

Thu, 20 Jan 2011 22:27:56 GMT

what flash version should i download?

Re: Xperia x10 "Unable to scan for networks"

Uliwooly — Thu, 20 Jan 2011 22:58:01 GMT

Get this version

http://www.multiupload.com/RU5LMRLGGK

once you download both files, unzip the flasher and look for a folder that will say "firmware"

then in that folder unzip the xperia x10a firmware (along with loader.sin)(10 sin files together)

go to the main folder (the previous folder before you got inside firmware)

Open the .bat file

Once open select 1, 2 , 3 or 4 depending on your windows version).

It will ask you: Please plug Xperia in flash mode so,

On your device: Unplug your USB cable, wait for it to boot. I waited for like 2 minutes and nothing so I had to press POWER again.

A device and a camera with a BLUE arrow will appear on your device screen. WAIT, WAIT, WAIT. It will reboot, and take like 2 minutes on sony ericson screen.

It will boot up eventualy.

let me know if this is better/easier if not I can try to take pictures of the step by step

Re: Xperia x10 "Unable to scan for networks"

Fri, 21 Jan 2011 00:02:18 GMT

everything was going great until i couldn't find the .bat file. its not there. here is a screenshot of the file

Re: Xperia x10 "Unable to scan for networks"

Fri, 21 Jan 2011 00:05:11 GMT

oh wait, its the windows batch file right?

Re: Xperia x10 "Unable to scan for networks"

Uliwooly — Fri, 21 Jan 2011 00:06:43 GMT

It will

X10Flash Windows Batch File

Re: Xperia x10 "Unable to scan for networks"

Uliwooly — Fri, 21 Jan 2011 00:07:05 GMT

Correct

Re: Xperia x10 "Unable to scan for networks"

Fri, 21 Jan 2011 00:10:59 GMT

ok, one more problem, my phone wont stay in flash mode. it boots up in 5 seconds and stops the process